You are here
CDM Coolant Heating System
The Hotstart® CDM is a complete, packaged heating system with thermostat, pump, flow switch and all required controls. The CDM heats engines ranging in size from 400L-1000L displacement at 50°C over ambient temperature. The system features an electronic controller which continuously monitors the flow and temperature rise across the heating element, ensuring safe, reliable operation. Forced circulation of the coolant delivers uniform heating throughout the entire engine, extends element life and reduces electrical consumption
Specifications:
1. Heating Fluid: Engine coolant (50% glycol/50% water)
2. Fluid Capacity: 14L (3.7 gl)
3. Power: 48, 60, 66, 72kW (in two stages)
4. Pump Power: Up to 1.5kW (2HP)
5. Rated Voltage: 3 Phase 400V, 480V, 575V, 690V (50 or 60Hz)
6. Flow: 13.5 m3/hr (60GPM) — 60Hz
7. Tank Material: Steel • Max Pressure: 8.61 bar (125PSI)
8. Thermostat: Adj. 60° - 160°F (16° - 71°C)
9. Pressure Loss: 0.10 bar (1.5PSI)
10. Ingress Protection: IP54, NEMA 12 & 13
11. Pressure Relief Valve: 6.2 bar (90PSI)
12. Hi-Limit Cutout: 200°F (94°C)
13. 1.25” NPT Inlet, 1.25” NPT Outlet
Remark: Please click here to to register if you want more detail info of our products.